Hero Image

 

Bedding Spring Wire

OneSteel manufactures a wide range of Hard Drawn Bedding Spring Wires. These wires can be manufactured to Australian Standard AS 2266 - Carbon Steel Spring Wire for Bedding and Seating, or the customer's own specialised requirements.

OneSteel’s TruForm™ Spring has been developed to suit most types of bedding spring machines, including the latest high-speed computer controlled machines. It features tight tolerances on both diameter and tensile specifications and has the potential to deliver the cost savings and reliability needed in a globally competitive market.

Wire suitable for furniture spring is also available.

Diameter Tolerances

Nominal Diameter Tolerance
1.30mm to 2.42mm TruForm™ Spring + 0.00mm +/- 0.02mm
Equal and above 2.50mm up to and including 3.94mm +/- 0.02mm
4.00mm +/- 0.03mm
5.00mm +/- 0.04mm

Tensile Strength (MPa)

Tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. OneSteel produces a variety of tensile ranges for Bedding Spring Wire, but all fall within the range of 1340 - 2050MPa. TruForm™ Spring products have a tensile range of 150MPa while other products conform to AS 2266.

Steel Chemistry

OneSteel uses a variety of steel grades to achieve the tensile specifications for Bedding Spring Wire. Carbon content is varied to achieve the desired result.

Element %
Carbon 0.50/0.71
Phosphorus 0.03max
Manganese 0.60/0.80
Silicon 0.15/0.35
Sulphur 0.03max